Waiting for you to follow us in these SNS, thank you. 
0086-17322110281
info@moldclamps.net

DGMF MOLD CLAMPS CO., LTD
·

Complete Specifications

Adequate Inventory

Factory Outlet

Fast Delivery

Quality Assurance

Competitive Price

Customizable

Our Mold Clamps Make Your Machines More Efficient And Durable, Lower Maintenance Costs!

Request for Inquiry
MOLD CLAMPS
+
+
NEWS    PRODUCTS
DGMF MOLD CLAMPS CO., LTD

Dynamic news
How to install a punching mold?
Original: | Author: dgmfmoldclamps | Publish Time: 2020-03-21 | 12509 Views | Share:
How to install a punching mold?

8) The comprehensive operation for 3-5 minutes. During this period, fill the oil between the guidepost and the bushing, and confirm whether there is any abnormality in heat.

9) Try on the material to be processed and check whether there is any obstacle in the insertion.

10) Processing can only be performed after the above work is completed. First, press the first material positioning lever set on the side of the lower mold until the feed material touches the positioning lever. After inserting, first, carry out a trial punch by hand feed until the end of the final process.

11) After confirming that there is no abnormality in the manual feed type, close the switch of the punch feeding device. At this time, the feeding work needs to be performed completely in the completed position.

12) The punching die uses a single punch motion to confirm whether the feed amount is appropriate.

1. Purpose: To ensure the correct installation of the mold.

2. Scope: Applicable to our company's stamping die, adjusters.