Four kinds of attachment can be performed with one conformity bolt.

You do not need bolts in different sizes.

The easy mold clamp body(1) can be attached and detached only with half or one turning of the bolt.

2.      You can adjust the easy mold clamp with one-touch to the various thicknesses of the standard mold bases.

3.      Insertion and extraction of the bolt to the body from the side are easy. Because the clamping washer(4) is always suitable in the vertical direction at the time of attachment and detachment of the mold.

4.      Even if there are a few spaces of the die plate.

The block(2) can be shifted inside so that you can set a mold.

5.      Since the ground contact area of the block(2) is large, the die plate and bolt hole do not get damage.

6.      As the easy clamp body(1) and the block are connected with the link(3), there is no fear of losing the block(2), moreover, attachment and detachment of mold are easy.