Four types of mounting can be done with one compatible bolt. Also, the body can be removed and attached by simply turning the bolt 0.5 to 1 turn.
■ These are the easy clamps, the standard version of mold clamps for plastic injection molds.
■ Four types of mounting can be done with one compatible bolt. Also, the body can be removed and attached by simply turning the bolt 0.5 to 1 turn.
■ It changes to the thickness of a commercial mall base with a single touch.
■ The clamping washer is always in the vertical direction when the mold is removed (die plate of a horizontal molding machine, etc.), making it easy to insert and remove the body from the side.
■ When there is little room on the die plate, the block can be shifted and installed.
■ Because the grounding area of the block is wide, the die plate and bolt holes are not damaged.
■ The body and block are linked by a link, so the mold can be easily attached and detached without fear of loss.
■ Because the bolts are tightened vertically, they do not damage the die plate threads.
Here are the steps for how to install easy mold clamps.
1.